motul gear oil 90 Motul Motyl Gear Oil

motul gear oil 90 Motul Motyl Gear OilMotul Motylgear (GL 4 5) 75W 90 Gear Oil 1 Liter Type: Gear Oil 75W 90 Technosynthese (Semi Synthetic) Specifications: . Meets API GL 4 GL 5 OEM Approval: MIL L 2105D Volume: 1 liter Case = 12 (1) Liter Bottles Technosynthese Gearbox and differential lubricant MOTUL Technosynthese lubricant is a lubricant composed of a mixture of synthetic base oil and mineral oil base. MOTUL routinely uses a synthetic ester base oil in its lubricants. Technosynthese

Motul Motylgear (GL-4/5) 75W-90 Gear Oil - 1 Liter

Type: Gear Oil 75W-90 - Technosynthese (Semi-Synthetic)
Specifications: . Meets API GL-4/GL-5
OEM Approval: MIL-L-2105D
Volume: 1 liter / Case = 12 (1) Liter Bottles

Technosynthese - Gearbox and differential lubricant

MOTUL Technosynthese lubricant is a lubricant composed of a mixture of synthetic base oil and mineral oil base. MOTUL routinely uses a synthetic ester base oil in its lubricants.

Technosynthese lubricant for a better resistance at high temperature and longer life time. All mechanical transmissions, synchronized or not synchronized gearboxes, gearbox/differential, transfer gearbox an hypoid differentials without limited slip system operating under shocks, heavy loads and low revolution speed or moderate loads and high revolution speed.

Very high lubricating power decreases friction and wear. SAE 90 grade at hot temperature to provide outstanding oil film resistance at hot temperature and/or to reduce transmission noise. Fluid at low temperature to allow easier gear shifting when the gearbox is cold. Less effort required on the gear lever to shift the gears.

TYPE OF USE
Specially recommended for gearboxes hard to shift and/or noisy gearboxes.

All mechanical transmission, synchronized or not synchronized gearboxes, gearbox/differential, transfer gearbox and hypoid differentials without limited slip system operating under shocks, heavy loads and low revolution speed or moderate loads and high revolution speed.

PERFORMANCES

• Extreme pressure lubricant for an efficient anti wear protection reinforced with synthetic base stocks for a better resistance at high temperature and longer life time.

• Stays in 90 grade after KRL 20 hours shear test as requested by SAE J306 Standard, July 1998 update

• Very high lubricating power which decreases friction and wear.

• 90 grade at hot temperature to provide outstanding oil film resistance at hot temperature and/or to reduce transmission noise.

• Fluid at low temperature to allow easier gear shifting when the gearbox is cold.

• Less effort required on the gear lever to shift the gears.

• Suitable for any type of seal and yellow material used in gearboxes design.

• Anti-corrosion, Anti-foam.